Decoration points and precautions

Update time:2022-05-11

1. Is the floor flat?
If you want to check whether the floor of the building is smooth, you only need to use a long ruler (or a special ruler with a level), lean against the wall and the ground, check whether it is smooth, and observe whether there are scratches and cracks on the wall, and whether there are explosive points on the wall (explosive point: When the quicklime is not well-mixed when the mature lime is produced, it will form a burst point when it is spread on the wall. When the "burst point" is hit with an iron tool, quality problems such as looseness and shedding will be found in a large area.)
2. Are there any cracks on the wall?
While checking whether the wall is smooth, it is also necessary to check whether there are cracks on the wall (four common cracks: strength cracks, settlement cracks, temperature cracks, and deformation cracks), whether there are leaking barbed wire and steel bars. If the above wall problems are found during the house inspection, the developer can help to repair them and then sign.
3. Whether the indoor stairs are defective
It mainly depends on the flatness of the stairs and whether there are any defects.
4. Whether the installation track of doors and windows is smooth
In terms of door and window inspection, the most important thing is to check whether the tracks of doors and windows are smooth. Especially those who have casement windows, you must pay attention to whether they can be closed tightly. Otherwise, there will be wind entering the room, especially in the cold north, so you will be miserable in winter. If these problems are found during the re-inspection, please notify the developer directly, and they will fix them soon. If you have signed the contract, then find the developer to deal with these problems. Then their work efficiency is tortoise speed.
The second aspect is to check whether the door and window glass of the new house is damaged. Whether the window frame is deformed. If any abnormality is found, find the developer to solve it as soon as possible. This is a matter that requires your attention, especially the doors and windows of each room must be carefully checked to avoid unnecessary loss of money.
5. Whether the entrance door is bumped or painted
It is necessary to carefully check whether there are bumps and paint on the entrance door. Strictly speaking, the inside, outside and top of the door body must be painted. The gap between the door should not be too large, there is no special sound when the door is opened and closed, the four sides of the door should be close to the door frame, and the gap on one side of the door lock should not be too large. At the same time, don’t forget to try the lock, mainly to see if the key is easy to use, and Whether the door lock is installed firmly. Another very important point is that the sound insulation effect of the door is better, as well as the degree of sealing.
6. The balcony equipment is not damaged
When checking and accepting the balcony, it is mainly to check whether the ground of the balcony is flat or not, and secondly, whether the window equipment of the balcony is in good condition.
7. The storey height should not be lower than 2.8 meters
The building height of a building is generally 2.8 meters, and the actual height cannot be lower than 2.6 meters. The actual height of a 3-meter-high building cannot be lower than 2.75 meters, but the residential floor height cannot be lower than 2.8 meters.